Papers › Learning joint segmentation of tissues and brain lesions from task-specific...

Learning joint segmentation of tissues and brain lesions from task-specific hetero-modal domain-shifted datasets

8 Sep 2020arXiv:2009.04009archive 2025-07-28

Reuben Dorent, Thomas Booth, Wenqi Li, Carole H. Sudre, Sina Kafiabadi, Jorge Cardoso, Sebastien Ourselin, Tom Vercauteren

Brain tissue segmentation from multimodal MRI is a key building block of many neuroimaging analysis pipelines. Established tissue segmentation approaches have, however, not been developed to cope with large anatomical changes resulting from pathology, such as white matter lesions or tumours, and often fail in these cases. In the meantime, with the advent of deep neural networks (DNNs), segmentation of brain lesions has matured significantly. However, few existing approaches allow for the joint segmentation of normal tissue and brain lesions. Developing a DNN for such a joint task is currently hampered by the fact that annotated datasets typically address only one specific task and rely on task-specific imaging protocols including a task-specific set of imaging modalities. In this work, we propose a novel approach to build a joint tissue and lesion segmentation model from aggregated task-specific hetero-modal domain-shifted and partially-annotated datasets. Starting from a variational formulation of the joint problem, we show how the expected risk can be decomposed and optimised empirically. We exploit an upper bound of the risk to deal with heterogeneous imaging modalities across datasets. To deal with potential domain shift, we integrated and tested three conventional techniques based on data augmentation, adversarial learning and pseudo-healthy generation. For each individual task, our joint approach reaches comparable performance to task-specific and fully-supervised models. The proposed framework is assessed on two different types of brain lesions: White matter lesions and gliomas. In the latter case, lacking a joint ground-truth for quantitative assessment purposes, we propose and use a novel clinically-relevant qualitative assessment methodology.

PaperPDFCodeCode Syntology ran

In Syntology View this paper on Syntology, its page in Syntology's graph. That page adds which of its functions are also present in other papers' code Syntology holds, with dates, and its dated run record as JSON and a README badge. It also lists the repositories linked to the paper, the abstract and the calls for agents.

Open this paper in Syntology's Atlas, the map of the papers in Syntology's graph and their citations.

For agents, on Syntology's MCP service (how to connect):

Code

Syntology 5 code samples harvested from 1 repository linked to this paper: 3 ran (of which 0 constructed an object rather than computing a result; 3 with no instrument failure: 0 honoured, 0 violated, 3 with no contract checked; 0 where Syntology's instrument failed) · 2 unverified. “Where Syntology's instrument failed” counts failures of Syntology's instrument, not of the code; here there are none.

By repository: official repository: 5 samples from 1 repository, 3 ran (3 with no instrument failure; 0 where Syntology's instrument failed). The run record, sample by sample. “Ran” means executed on a synthesized input, not that the code is correct or reproduces the paper.

Levels written on 2026-09-25 (UTC): the dates Syntology's graph wrote each sample's verification level, not when the code executed.

ReubenDo/jSTABL officialmentioned in papermentioned on GitHubpytorchApache-2.0Syntology: 5 samples, 3 ran (0 instrument-failed) · 2 unverified report

Repository list and official/mentioned flags are the archive's, frozen 2025-07-28. Reachability, where shown, is from one Syntology probe window (2026-09-16 to 2026-09-18); repositories not probed show nothing. GitHub stars are not tracked.

Code Syntology ran Syntology

5 samples harvested: 3 ran (of which 0 constructed an object rather than computing a result; 3 with no instrument failure: 0 honoured, 0 violated, 3 with no contract checked; 0 where Syntology's instrument failed) · 2 unverified. “Where Syntology's instrument failed” counts failures of Syntology's instrument, not of the code. Syntology's record for this page has not changed since , the first build that kept a record date for it; when this build read Syntology's graph is in the build record. That date is not when the samples ran.

3ran
2unverified

Licence: 0 of the 5 samples are pointer only, meaning Syntology does not serve that copy's text. This page shows no code text for any sample; each one links to its file in the repository.

Harvested from ReubenDo/jSTABL. “Ran” means the sample executed on a synthesized input. It does not mean the output is correct, and nothing here reproduces the paper's results. A line beginning “fixture:” under a sample that ran gives the arguments Syntology's fixture called the sample with, each as name:type/rank/element kind (? where none was recorded), and the type of what the fixture's run returned, exactly as the harness recorded them; the arguments and the returned type were recorded by two separate runs of the same fixture. No output value is shown, and a returned type says nothing about whether the output was right. “Level recorded” gives the UTC date when Syntology's graph wrote the sample's verification level, not when the code executed; where the level was written before Syntology's graph kept that date, the row says “level recorded, date not recorded”. “Honoured” and “violated” refer to a contract Syntology drafted from the code itself. “Our draft was wrong” and “the contract check could not run” are failures of Syntology's instrument, not of the code: the sample ran on Syntology's synthesized input, and then the drafted contract did not describe it, or the check itself raised an error (RAISES), lacked a dependency (DEP_MISSING) or ran out of time (TIMEOUT); hover the label for which. A metamorphic tier, where shown, is evidence of the output's shape, not that the sample implements the method.

Each sample ends with its code_sha256. A sample's code_sha256 is Syntology's identity for that exact code. It is printed in full (16 hexadecimal characters for every sample in this build), and get_code(code_sha256="…") takes it exactly as printed. An agent calls it on Syntology's MCP service (how to connect); click an identity to copy that call.

Repository labels, per sample. official repository: The archive marks this repository official for the paper. named in the paper: The archive records that the paper mentions this repository; it is not marked official. community (archive-listed): In the archive's code links for this paper, not marked official and not recorded as mentioned in the paper. found in paper text by Syntology: Syntology found this repository in the paper's own text; whether it is the authors' implementation is not asserted. community: Not in the archive's code links for this paper; a community repository Syntology harvested. Samples are grouped by repository: a repository marked official first, then by how directly the repository is tied to the paper, then in the archive's order; never by how many ran. Licence labels name the repository's licence as recorded at harvest. “Pointer only” means Syntology does not serve that copy's text, for one of six reasons: no licence file was found; the licence was not identified; the licence is recorded as permissive but that copy's record is not marked cleared; the licence is outside the permissive list Syntology serves text under (MIT, Apache-2.0, BSD and similar); this paper's copy was not located, so its licence is not recorded; or this paper's copy is cleared, but the stored copy of the same code that Syntology serves is not. Some licences outside that list permit redistribution, such as WTFPL, and GPL-3.0 under its conditions; they are simply not on the list. Hover a licence label for the reason. File links open the file on GitHub at the default branch, which may have changed since the harvest.

A function or class name links to its page when the name occurs in the harvested code of at least 5 papers; the name is a string, not an identity. A census tag appears when Syntology's census ran implementations with that name on one shared input per bucket: it gives how many were compared, from how many papers, and how many distinct outputs they produced, and names this sample's bucket when this sample was one of them.

ReubenDo/jSTABL official repository 5 samples, 3 ran (0 instrument-failed) · 2 unverified
find_zeros jstabl/utilities/cropping.py ran Apache-2.0 (permissive) · 219e0cf24b6fc55c · report fixture: signature img_array:ndarray/3/float · returned tuple · level recorded 2026-09-25
merge_skips jstabl/glioma/train_BRATS_adversarial.py ran Apache-2.0 (permissive) · 53ab07cec84a5b42 · report fixture: signature skips:list/1/Tensor · returned tuple · level recorded 2026-09-25
onehot in 39 papers
census: 5 implementations from 5 papers, 3 distinct outputs across 2 buckets, one shared input per bucket
jstabl/utilities/jaccard.py ran Apache-2.0 (permissive) · dac2b744c6b4459a · report fixture: signature gt:Tensor/2/int, shape:tuple/1/int · returned Tensor · level recorded 2026-09-25
jaccard in 33 papers jstabl/utilities/jaccard.py unverified Apache-2.0 (permissive) · 4c3a76d28a890461 · report
jaccard_tissue jstabl/utilities/jaccard.py unverified Apache-2.0 (permissive) · 563205dae273c020 · report

Tasks

Data AugmentationLesion SegmentationSegmentation

Results from the paper archive 2025-07-28

No leaderboard rows for this paper in the archive.

Report a problem or propose a change · a person checks every report against the paper or source before anything changes; decisions are listed on /corrections